Maestro 3D Ortho Studio - Manuale Utente
Introduzione all'utilizzo del software Maestro 3D Ortho Studio
Questo documento ha lo scopo di introdurre l'utente in modo semplice ed intuitivo all'uso del software Ortho Studio. Si prega di leggere attentamente il manuale prima di utilizzare il software.
Introduzione
Maestro 3D Ortho Studio è un software facile da utilizzare sia per i laboratori che per gli ortodonzisti.
Le principali caratteristiche sono:
- Gestione di una base di dati con Pazienti, Dottori e Cliniche.
- Scelta del sistema di riferimento per le due arcate.
- Creazione e modifica delle basi virtuali.
- Setup Virtuale.
- Ispezione occlusale.
- Analisi di distanze, misure e sezioni.
Installazione del Software
Per installare il software Maestro 3D Ortho Studio, fare doppio click sul file Maestro.3D.Ortho.Studio.vx.xx.xxx.Setup.exe
Step 1: Selezionare la lingua di installazione.
Step 2: Una finestra di benvenuto apparirà sullo schermo, premere Avanti per continuare.
Step 3: Si prega di leggere attentamente la licenza d'uso del software. Accettare la licenze e premere Avanti per continuare.
Step 4: Selezionare la cartella di destinazione. (Noi consigliamo di utilizzare la cartella di default). Premere Avanti per continuare.
Step 5: Selezionare la cartella del menu Start. (Noi consigliamo di utilizzare la cartella di default). Premere Avanti per continuare.
Step 6: Selezionare se desiderato di creare l'icona del programma sul Desktop. Premere Avanti per continuare.
Step 7: A questo punto apparirà sullo schermo il riassunto di tutte le opzioni di installazione selezionate. Premere Installa per installare il software.
Una barra di progresso mostrerà l'avanzamento dell'installazione.
Step 8: Installazione completata. Premere Finire per completare.
| Utilizzare Windows 7 - 64 bit.
Installare tutti gli update di Windows disponibili. Installare gli ultimi driver disponibili dal sito di NVIDIA, web site http://www.nvidia.com. Impostare lo slider UAC (controllo account utente) al minimo. Tasto destro del mouse sopra l'icona del software e Proprietà -> Avanzate -> (spuntare) Esegui come Amministratore. |
Interfaccia Utente
La figura sotto mostra come appare l'interfaccia utente del software.
Toolbar Principale
La toolbar principale permette di accedere a tutte le funzionalità dell'Ortho Studio Software.
- 1) nuovo caso.
- 2) apri un caso esistente.
- 3) salva caso corrente.
- 4) esporta:
- come Ortho: esporta il caso corrente in *.ortho file format. Utile per fare del digital service per i propri clienti. Con Ortho Studio Viewer i clienti possono vedere, ispezionare e misure i modelli ed anche il setup virtuale.
- come Orthoipad: esporta il caso corrente in *.orthoipad file format. Utile per fare del digital service per i propri clienti che hanno un Apple iPad. Con Ortho Studio Viewer iPad i clienti possono vedere ed ispezionare i modlli. Questa funzione di esportazione è accessibile solo se si utilizza uno scanner della linea Maestro insieme al software Ortho Studio. Scarica Ortho Studio Viewer per iPad qui: Ortho Studio Viewer iPad
- come Stl: esporta il caso corrente in una cartella. La cartella conterrà un file *.txt con le informazioni del caso e i modelli mascellari e mandibolari in *.Stl file format.
- 5) cambia sistema di riferimento.
- 6) cambia articolazione.
- 7) aggiungi basi virtuali.
- 8) viste multiple.
- 9) viste:
- vista frontale.
- vista posteriore.
- vista lato destro.
- vista lato sinistro.
- vista superiore.
- vista inferiore.
- 10) apri/chiudi bocca.
- 11) visualizza mandibola/mascella/tutto. Cambiando la vista fra mascella o mandibola o entrambe si attivano\disattivano alcune funzionalità del software.
- 12) uscita.
- 1) ispezione occlusale. Calcola le distance e i punti di contatto fra la mascella e la mandibola.
- 2) sezioni.
- 3) misure dei denti.
- 4) lunghezza dell'arcata.
- 5) misure libere:
- misure punto-punto.
- misure di angoli.
- 1) segmentazione:
- segmentazione dei denti: disegna una linea di margine per ogni dente.
- linea di taglio: separa i denti dalla gengiva.
- cambia sistema di riferimenti: aggiusta il sistema di riferimento e la radice per ogni dente.
- 2) setup virtuale.
- 3) costruzione dei modelli.
- 4) taglia e chiudi.
- 5) menu a tendina dei modelli mascellari e mandibolari.
- 6) mostra/nascondi attachi/brackets/brackets key/etichette.
- 7) animazione.
- 8) esporta:
- come file Stl.
- come file Zip.
Toolbar inferiore
La toolbar inferiore è l'area dello schermo che visualizza una barra di progresso durante ogni computazione e permette attraverso appositi pulsanti di cambiare le proprietà di visualizzazione.
- 1) ingrandisci [Key PGDown]/rimpicciolisci [Key PGUp].
- 2) mostra/nascondi trackball.
- 3) resetta trackball [Key R].
- 4) proieczione parallela [Key O], proieczione prospettica [Key P].
- 5) smooth shading [Key S], flat shading [Key F].
- 6) mostra/nascondi triangoli, bordi [Key E], vertici [Key V].
Area di Visualizzazione / Editing e Area di Informazione
L'area di visualizzazione ed editing è l'area della finestra dove i modelli sono disegnati e visualizzati e dove le operazioni di editing sono consentite.
Nell'area di visualizzazione è possibile visualizzare\creare le basi virtuali, l'occlusione fra la mascella e la mandibola, visualizzare le misure dei denti, la lunghezza dell'arco e realizzare e mostrare il setup virtuale.
Per esaminare i modelli visualizzati, i parametri della camera (posizione, scalatura, rotazione) possono essere settati attraverso uno strumento chiamato trackball.
La trackball è uno strumento semplice da utilizzare, Premere e trascinare il tasto sinistro per ruotare intorno al modello. Ruotare la rotellina centrare del mouse per effettuare lo zoom. Premere e trascinare il tasto destro per muovere la camera.
L'area di informazione è la parte dello schermo che mostra le informazioni sul caso, come il dottore, il paziente, l'identificativo del caso etc.
Create a New Case and Open an Existing Case
Create a New Case
To create a new case press the 
New Case button located in the main toolbar.
The process of creating a new case consists in the following steps:
- specify the Surgery data (optional)
- specify the Doctor data (optional)
- specify the Patient data (optional)
- specify the relationship between Surgery, Doctor and Patient (optional)
- choose maxillary and mandibular models (required)
To create a new Surgery press the 
Add new surgery button, located in the left side of
the screen. After filling the fields of the form that appears in the main side of the screen specifying the
data of the Surgery, press the 
Insert button to add the new Surgery to the database
or the 
Clear button to clear the fields of the form.
In the same way it is possible to create a new doctor pressing the 
Add new doctor button and to create a new patient pressing the 
Add new patient button. In order to define a Case it is necessary to press the 
Select patient button located in the left side of the screen.
In the main side of the screen now it is possible to make the relationship between Surgery, Doctor and Patient. The first half of the main screen area allows to make the relationships between Surgery, Doctor and Patient (see picture below).
Select the surgery from combobox. The 
Delete button allows to delete the surgery currently selected. Please note that when pressing the Delete button the Surgery definition is phisically removed from the Database of the Surgeries.
When the list of the Doctors associated to a given Surgery is empty and in general when it is necessary to add a new Doctor to the Surgery previously selected, it is possible to select a Doctor in Other doctors combobox and then pressing the Add button. The 
Delete button located nearby to the Other doctors combobox allows to remove the definition of a Doctor from the Database of Doctors.
Select a Doctor from combobox. This allows to select one of the Doctors associated to the Surgery. The Delete button located nearby to the Doctor section allows to remove a Doctor from the Doctors of a Surgery without deleting the doctor from
the Database of Doctors.
When the list of the Patients associated to a given Doctor is empty and in general when it is necessary to add a new Patient to the Doctor, it is possible to select a Patient in Other
patients combobox and then press the Add button. The 
Delete button located nearby to the Other patients combobox allows to remove the definition of a Patient from the Database of Patients.
Select one of the Patients associated to the Doctor. The Delete button located nearby to the Patient section allows to
remove a Patient from the Patients of a Doctor without deleting the patient by the Database of Patients.
Please note that in the second half of the screen main area it is possible to modify the fields of the Surgery, Doctor and Patient previously added.
Pressing the 
Next button located in the lower right corner of the window allows to proceed in the definition of the case.
The task of choosing maxillary and mandibular models can be accomplished in three distinct way, see the image below.
- choosing a model by the tree of the Maestro Data (this is the folder in which the models acquired by Maestro 3D Dental Scanner are placed by default).
-
importing a model by an external folder using the Open files from disk button (the allowed format for the models to import is the STL file format).
-
importing a model by an external folder using the Import Ortho files from disk button (the allowed format for the models to import is the ortho file format).
-
start the acquisition with Maestro 3D Dental Scanner.
Open an Existing Case
To open an existing case click on the 
Open case button located in the main toolbar.
In the treeview it is now possible to select an existing case. To see all the cases of a given
patient press the Select patient button located in the left side of the screen.
In this phase it is possible to change the properties of a case, changing the Surgery,
Doctor and Patient info and adding a new Surgery, Doctor and Patient.
Also note that it is possible to move an unknown case or a case of a given Patient in a case of another Patient simply locating the case in tree and dragging it from the starting folder to the destination folder.
Pressing the Next button located in the lower right corner of the window it is possible to
proceed with the next operation.
Pressing the 
Cancel button break the process of opening an existing case.
The image below shows the process of opening an existing case.
Changing the Local Origo
In order to change the Local Origo for the maxillary and mandibular models, press the 
Change Local Origo button.
In the editing area appears a Manipulator (see image below). The center of the manipulator represents the origin of the coordinate system, the red arrow represents the X axis, the green arrow represents the Y axis and blue arrow represents the Z axis of the coordinate system. Using the Left mouse button it is possible to translate the Manipulator (dragging the arrows) or rotate the manipulator (dragging the circles). These operations allows to change the coordinate system of the models. Pressing the [[image:next.png] Next button located in the lower right corner of the editing area allows to move the maxillary and mandibular models in the new reference coordinate system. In order to apply the changes to the models, please remember to press 
the Save case button located in the main toolbar.
Virtual Base Creation
In order to add the virtual base for the maxillary and mandibular models, press 
the Add virtual base button.
First step to perform when doing virtual base editing, it's to define a trimming line in order to remove the unimportant areas of model.
It's possible to define trimming line simultaneusly for both models. After defining trimming line, software automatically detect area to remove.
|
TIPS: SHIFT + click or drag with left mouse button to add a point of the spline. |
The second step is the editing operations on virtual bases. It's possible to choose several base types, in particular it's possible to choose between ABO, Parallel, Tweed and Ricketts models. It's also possible to perform simultaneusly several several editing operations for virtual base:
A: changing base border shape:
dragging points located at base border it's possible to change the shape of the
border itself. It's also possible to add/remove points using shift + left mouse double
click. It's also possible to draw the base border just using the shift + left mouse
button dragging near to the base border. Dragging the arrows located at base
border it's possible to move the border up and down.
B: changing base shape:
dragging points and arrows located at corners of virtual base it's possible to change the shape of the virtual base (for example it's possible to change the width and the length of bases). During all the editing operations, constraints that exists between angles/sides of base are preserved.
C: changing base height:
dragging the arrow positioned at base bottom it's possible to change the height of bases (this option it's disabled for ABO bases).
All operations concerning virtual base editing process are performed with Shift + left mouse button dragging (Shift + left mouse double click to add remove points to base border). Using the “Symmetrical changes” checkbox, editing will be performed simultaneusly on
both bases.
After finishing editing process just press Next button in order to finalize the editing procedure and merge the defined bases with maxillary and mandibular models.
|
TIPS: SHIFT + double-click / drag with left mouse button to add/remove points to base border. |
Stitching between base and model it's more smooth and the transition between arch and base it's smoother.
Analysis and Measures
Occlusion Inspection
To see and analyze the occlusion inspection between maxillary and mandibular arcs just press the 
Occlusion inspection button. After the computation each point of the surface of an arch is painted with a color representing the distance by the opposite arch surface.
In the right side of the editing area is located a legend that explain the meaning of the colors.
It is also possible double clicking on the model to know the exact distance value for this point.
Please note that it is possible query for the value only for an area of the model with a color assigned.
The following images shows the occlusion inspection visualized on both the arcs. To activate this visualization press the 
Open mouth button.
The following image shows the occlusion inspection visualized on the maxillary arch. To activate this visualization press the 
Show Maxillary button.
The following image shows the occlusion inspection visualize on the maxillary arch. To activate this visualization press the 
Show Mandibular button.
Cross Section
In order to perform the analisys of a cross sections, press the 
Sections button. 2D measurements over cross sections aligned to main axes.
It's possible to slide the sections and measure distances on 2D cross sections.
With the left toolbox it's possible to change the plane, change the transparency of the model and see the animation.
See the image below:
|
TIPS: double-click with left mouse button to add a point into 2D grid. |
Teeth Measures
In order to perform the analisys of the distances between theeth, select the arch to inspect using the Show Maxillary button button or the Show Mandibular button and then press the 
measures button.
The image shows the process of measuring distances between theeth in the maxillary model. As for the process of the cutting line definition, it is possible to add, remove or modify the position of the points.
For each line segment defined by two consecutive points the current length of the segment is showed.
On the left side of the screen the total length and the average length of the segments are showed too.
Using the 
Undo button and the 
Redo button it is possible Undo / Redo all the operations performed.
It is also possible to clear the measure using the [[image::Polyline.delete.png]] Reset button.
In order to save the measures, after pressing the [[image::next.png] Next button, please remember to press the Save case button located in the main toolbar.
Arch Length
In order to perform the analisys of the arch length, select the arch to inspect using the Show Maxillary button button or the Show Mandibular button and then press the
measures button.
|
TIPS: double-click with left mouse button to add a point of the spline to compute the arch length. |
Put the points in the following order to define a correct spline. It's possible to add more than 3 points.
Free Measures
In order to perform the measures of length or angles, select the arch to inspect using the Show Maxillary button button or the Show Mandibular button and then press the 
measures button.
|
TIPS: double-click with left mouse button to add a point. |
Virtual Setup
With this feature, you can make a setup of both jaws and create all the models needed to complete the treatment. It's possible to add the custom attachments and the label 3D.
Tooth Segmentation
Detect Margin
In order to perform the tooth segmentation, select the arch to segment using the Show Maxillary button or the Show Mandibular button and then press the 
Tooth Segmentation button. Before this it's necessary complete the measurement of individual teeth.
The first step is identify the margin of the tooth. See the image below.
To identify the margin of the tooth, double-click with the mouse near the margin to add a new control point as showed below:
Every two points entered by the user, the software makes a line near on the margin of the tooth. Usually is enough 4 clicks to draw a margin, as shown in figure. If the autocomplition of the line is not correct, press CTRL + Z or press button and try to add a new click in a different position example closer to the previous point.
|
TIPS:
|
Cutting Line
In order to perform the cutting line of the tooth segmentation, select the arch to segment using the Show Maxillary button or the Show Mandibular button and then press the 
Cutting line button. Before this it's necessary complete the previous step of Detec Margin.
See the image below:
|
TIPS:
|
Tooth Local Origo
In order to perform the local origo of each tooth, select the arch to segment using the Show Maxillary button or the Show Mandibular button and then press the 
Change local origo button. Before this it's necessary complete the previous step of Cutting Line.
See the image below:
To change the local origo of a tooth, double click over the tooth and use the manipulator to change the origo. When you change the local origo the virtual root of the tooth change direction. Use the left toolbox to change the root dimension when a tooth is selected.
See the image below:
|
TIPS: click with center mouse button to change the rotation center of the trackball. |
Virtual Setup
In order to perform the virtual setup, press 
the Virtual Setup button.
In this step you can translate and rotate the teeth in order to obtain the desired final position. To select a tooth, click with left mouse button over a tooth.
|
TIPS: SHIFT + left mouse button to translate the teeth selected. CTRL + left mouse button to rotate. Click with the middle mouse button to change the center of rotation of the trackball. |
Take a look to the GUI on the left of the screen that allows to access to all the functionalities of the Virtual Setup.
Layers
The layers are the steps that are useful to work with some groups of teeth in different period, i.e.:
you can move the posterior teeth and build a layer1.
than you can move the anterior teeth and build a layer2.
In this way when the software builds a set of virtual models, it is obtained:
| Original model | |
| virtual model (1) | Clear aligner 1 |
| virtual model (2) | Clear aligner 2 |
| ... | ... |
| Layer1 | Clear aligner L1 |
| virtual model (k) | Clear aligner k |
| virtual model (k+1) | Clear aligner k+1 |
| Layer2 | Clear aligner L2 |
So the first set of aligners don't move all teeth but only the posterior teeth. Only after some weeks, when you start to the layer1 you are ready to move the the anterior teeth.
It's possible to work only with the last layer. If you select a different layer, all
functionalities will be disabled.
Main toolbox
- 1) start a new setup project.
- 2) open an existing setup project.
- 3) exports the current setup project.
- 4) split the screen.
- 5) show/hide tooth manipulator.
- 6) show animation.
- 7) change teeth/gum transparency.
Movement Overview
With this toolbox it's possible to select a tooth from the combo menu and access to all operations of the single tooth.
- 1) list of all teeth.
- 2) reset the position of the selected tooth.
- 3) extract and restore the selected tooth.
- 4) movements in the canonical directions of the selected tooth. The rotations are expressed in degrees and translations in millimeters.
- 5) this value is the maximum movement of the selected tooth. The tooth that exceeds this value is colored red. It's just a visible warning.
Ideal Arch
With this toolbox it's possible to show an ideal arch in the editing area. This can be used as a visual guide to move the teeth.
- 1) show/hide the ideal arch.
- 2) list of available ideal arch. To add a new arch:
- add new images as png file 32 bit with alpha channel (if you want to use the trasparency) into the subfolder idealarch under the ortho studio installation folder.
- 3) rotate, scale and translate the ideal arch to find the correct position.
Below an example of an ideal arch.
Brackets Module
With this toolbox it's possible too add the brackets over the teeth.
- 1) list of available brackets brand.
- 2) list of available brackets type for the selected brand.
- 3) add a new bracket. Hold SHIFT and double-click with the mouse over the tooth to add it.
- 4) remove the selected bracket.
Below, there is an example of a bracket with manipulator.
Another example of a case with all brackets.
Attachments
- 1) add a new attach. Hold SHIFT and double-click with the mouse over the tooth to add it.
- 2) remove the selected attach.
- 3) list of available attachments.
- 4) thickness of the attachment.
Below, there is an example of an attachment with manipulator.
Label
It's possible to put a 3D text over the gum or over the teeth. It's useful to identify the models after printed.
- 1) add a new label. Hold SHIFT and double-click with the mouse over the gum or over the teeth.
- 2) prefix of the label, i.e.: initials of the patient's name.
- 3) remove the selected label.
- 4) thickness of the label.
Below an example of two label over the model.
The written 123 will be replaced with the correct numeration after the build of the virtual models.
Show intersection/distance
- 1) teeth intersaction or teeth distnce.
- 2) scale of the measures.
- 3) show/hide color map over the teeth.
Below an exampe of teeth distance.
Teeth informations
Move the mouse over a tooth, it shows an informative label about the tooth's movement, see the image below.
Models Builder
In order to perform the models builder, select the arch using the Show Maxillary button or the Show Mandibular button and then press the 
Models builder button.
In the left of the screen there is a treeview with all layers. Between two layers there is a transition models item. Select it to choose the movement of the teeth for each virtual model. Belown an example of the models builder function:
in detail:
- 1) start and end position, from layer(n) to layer(n+1). In this example: from Upper Jaw to Layer.
- 2) information about distance:
- Average: is the average value of the movement of all tetth.
- Max: is the value of the max movement between all teeth.
- 3) desidered value of the max movement of the teeth for each virtual model.
- 4) number of virtual models that will be generated.
- 5) real value of the max movement of the teeth for each virtual model.
- 6) this label indicates that there will be generated a template model to stick attachments/brackets.
Cut and Close
This feature was created to remove from virtual models all surface that it's not necessary for the construction of invisible aligners. This saves a lot of print material.
In order to perform the cut and close, select the arch using the Show Maxillary button or the Show Mandibular button and then press the 
Cut and Close button.
Rotate the plane with the green circles and translate the plane with the red arrows. Press the Next button to cut and close all virtual models.
